Brick Rainscreen Cladding at The Heights School in Arlington, VA

Download the Case Study (PDF)
Brick rainscreen cladding helped bring an unconventional school design to life at The Heights in Arlington, Virginia. Using more than 33,000 square feet of Corium glazed brick, the project extends the appearance of masonry across rotating building volumes, large triangular soffits, and narrow bands above glass curtain walls.
Completed in 2019, The Heights, formerly known as Wilson Secondary School, combines two secondary programs in a building designed by BIG (Bjarke Ingels Group) and LEO A DALY. Its distinctive architecture presented an equally distinctive façade challenge: maintaining continuous brick surfaces while accommodating complex geometry and building movement.
Bringing Brick to a Rotating School Design
The Heights is organized as a series of elongated building volumes rotated around a shared hinge point. This arrangement creates usable outdoor space above each level and broad soffits beneath the projecting forms, helping a vertically organized school retain connections to outdoor space.
Wrapping these floating volumes in conventional brickwork would have been challenging. The façade needed a brick cladding system that could accommodate the building’s unusual shapes and transitions while preserving the architectural character of fired clay.
Corium Brick, a mechanically attached, rear-ventilated brick rainscreen system, provided the basis for that solution. Its brick and support components enabled the project team to carry a consistent material expression across walls and overhead surfaces.
Accommodating Movement While Preserving Visual Continuity
Building movement was one of the project’s greatest façade challenges. Long, narrow brick bands above glass curtain walls and large triangular soffits required carefully coordinated support and movement details. The architectural goal was a continuous brick appearance, with minimal visual interruption from expansion joints.
The solution incorporated concealed movement details, including custom zipper joints. These details accommodated movement while maintaining the visual continuity of the brickwork. The approach concealed the movement joints rather than eliminating them.
The project also required a support system accommodating a 12-inch distance between the substrate and the finished wall face, along with detailed solutions for angled intersections between soffits and walls. Collaboration with the Corium engineering team helped resolve these conditions within the building’s distinctive geometry.
Award-Winning Brick Rainscreen Craftsmanship
According to Bruce Spengler, President of Calvert Masonry, the consistency of Corium’s tray and brick components supported steady installation progress and a uniform finished appearance. He also credited the collaboration with the Corium engineering team in addressing the project’s support conditions, complex intersections, and concealed deflection joints.
The project received the Washington Building Congress 2020 Craftsmanship Award in the rainscreen category, recognizing the execution of this demanding façade installation.
For architects exploring brick on cantilevered buildings, soffits, or complex façade forms, The Heights demonstrates the importance of considering the cladding system, support structure, and movement details together. Corium helped translate an ambitious architectural concept into a coordinated brick exterior.
Frequently Asked Questions About Corium Brick
What is Corium brick cladding?
Corium is a mechanically attached brick rainscreen cladding system that combines fired-clay brick with an engineered support system. It provides the appearance of traditional brickwork within a rear-ventilated façade assembly.
How does Corium differ from traditional brick?
Corium delivers the look of traditional brick with less weight and a faster installation process. Fired-clay bricks clip into metal support rails, making it easier to install brick across walls, projecting building forms, and overhead surfaces such as soffits.
Can Corium brick be used on soffits?
Yes. Corium can be engineered for soffit applications, allowing brick to continue from vertical walls onto overhead surfaces. At The Heights school in Arlington, Virginia, the system was used across large triangular soffits and rotating building volumes. The support and attachment details must be designed for the specific application.
Can Corium brick be customized with different colors and finishes?
Corium offers a range of colors, textures, and glazed finishes, along with opportunities to vary bond patterns and architectural details. Whether you’re selecting standard colors or creating a custom finish, a Telling representative will guide you through the options and coordinate the details to keep your project moving smoothly from design to installation.
How does Corium accommodate building movement?
Corium assemblies incorporate movement joints and coordinated support details to accommodate building movement. Depending on the project, these joints can be integrated into the brickwork to reduce their visual impact. At The Heights, custom zipper joints helped preserve the appearance of continuous brick surfaces.
Can Corium be used for new construction and recladding?
Yes. Corium can be specified for new construction and recladding projects. Suitability depends on the existing or proposed substrate, structural support, wall assembly, and project requirements.
Does Telling offer other types of brick?
Yes. In addition to Corium brick rainscreen cladding, Telling offers European facing brick, thin brick slips, and the Linus mortarless brick system. These options provide a range of sizes, colors, textures, and installation methods. A Telling representative can help you find the right brick for your design and project requirements.
